If you are looking for the official Micronex Shot 3 USB Driver, then you are at the right place. Here, we have managed to share the official USB Driver of your device which helps you to connect the device during the flashing process or while generally connecting the device to the computer.
There are basically 3 drivers available for your device. First two drivers i.e CDC and VCOM Driver will help you to connect the device during the Flashing process and the third Driver i.e ADB Driver will help you to generally connect the device to the computer.
Micronex Shot 3 CDC Driver for Flashing Firmware
Micronex Shot 3 VCOM Driver for General Connecting
Micronex Shot 3 ADB Driver for General Connecting
How to install Driver Manually
Step 1: Download and extract (unzip) the driver on your Windows Computer.
Step 2: Open Device Manager on your Computer.
Step 3: Select the Name of your Computer.
Step 4: From Actions Menu > Select Add Legacy Hardware.
Step 5: Click on Next.
Step 6: Now, Select Install the Hardware that I manually Select from a list and Click on Next Button.
Step 7: Click on Next.
Step 8: Click on Have Disk button and locate the driver on your computer.
Step 9: Click Add.
Step 10: Now, your driver will be installed and listed in the Device Manager.
[*] Driver Signature Error: If you are facing Driver Signature Error While installing the Driver on your Windows Computer, then to fix the issue watch this Video.
[*] If you are trying to flash the Stock Firmware using SP Flash Tool, then use both CDC and VCOM Drivers. ADB Driver may not work during the flashing process. But we recommend you to install all the three drivers on your computer, so that you can have the maximum possibility to connect the device successfully.
[*] Micronex Shot 3 Stock Firmware: If you are looking for the Stock Firmware then, you can download it from here.